Jabsco - Run-Dry Utility Puppy Pump, Part No. 23920-9523 - Amps 7.5 - Suction Lift To 8 Ft - DC Volts 24 Dometic heaters etc thus relieving the

heaters etc thus relieving the load on the alternator for a short time and so saving power and fuel

Inlet and discharge are internally threaded for 1" IPS or slip fit 1-1/2" ID hose externally

Short yellow Seal-Tite cover for weatherproofing HBL47CM20C Insulgrip plug when used with receptacles or connector bodies

10 fastener

Low profile

Jabsco - Run-Dry Utility Puppy Pump, Part No. 23920-9523 - Amps 7.5 - Suction Lift To 8 Ft - DC Volts 24 Dometic heaters etc thus relieving theHeavy duty, high performance versions of the proven Water Puppy pump but with an integral water reservoir at the discharge port to protect the impeller from being damaged after the water supply to the pump is depleted. This feature allows the pump to run dry for up to 10 minutes. Ideal for bilge pumping, emptying livewells or general fluid transfer where continuous monitoring of the pumping procedure is not practical. Both models have 3 4" IPS ports.